FixVault
Home › Nissan-Datsun › 2007 › Sentra SE-R › Repair and Diagnosis › Brakes › Traction Control › Brake Control System › Abs › Actuator And Electric Unit (Assembly) › Removal and Installation › Removal

Removal and Installation: Removal

  1. Disconnect ABS actuator and electric unit (control unit) connector and ground wire.
  2. Loosen brake tube flare nuts, then remove brake tubes from ABS actuator and electric unit (control unit).
  3. Remove brake booster hose from engine. Refer to "REMOVAL AND INSTALLATION ".
  4. Remove ABS actuator and electric unit (control unit) bracket mounting bolts.
  5. Remove ABS actuator and electric unit (control unit) from vehicle.
About FixVault