Removal and Installation: Installation: Notes

• Install the intake manifold bolts and nuts in the reverse order of removal, following the tightening sequences below.

Tightening Intake Manifold Bolts and Nuts 

• Tighten in numerical order as shown.
  CAUTION: After tightening No.5, retighten the No.1 bolt to specification.
  Fig 1: Identifying Intake Mainifold Gasket Bolt With Tightening Sequence

  

Installation of Electric Throttle Control Actuator: 

• Tighten the mounting bolts of electric throttle control actuator equally and diagonally in several steps.
• After installation perform procedure in "INSPECTION AFTER INSTALLATION ".