Fog Lamp Operation
WARNING: This page is about a different car, the 2006 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
The front fog lamp switch is built into the combination switch. The lighting switch must be in headlamp "ON" (2ND) position and "LOW BEAM" (B) position for fog lamp operation. With the front fog lamp switch in the ON position ground is supplied
- to front fog lamp relay terminal 2
- through the front fog lamp switch
- to body grounds E7 and E37.
The front fog lamp relay is energized and power is supplied
- from front fog lamp relay terminal 3
- to terminal + of each front fog lamp.
Ground is supplied to terminal - of each front fog lamp through body grounds E7 and E37. With power and ground supplied, the front fog lamps illuminate.