FixVault

Component Inspection: Condenser

WARNING: This page is about a different car, the 2006 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Disconnect condenser harness connector.
  3. Check resistance between condenser terminals + and -.

    Resistance: Above 1 MΩ [at 25°C (77°F)] 

    Fig 1: Checking Resistance Between Condenser Terminals + And -
    G04192289Courtesy of NISSAN MOTOR CO., U.S.A.