FixVault
Home › Nissan-Datsun › 2007 › Sentra SE-R › Repair and Diagnosis › External Pages › Different variant/trim › Section 6 (Engine Control System - Introduction (MR20DE)) › Basic Service Procedure › Accelerator Pedal Released Position Learning › Operation Procedure

Operation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Make sure that accelerator pedal is fully released.
  2. Turn ignition switch ON and wait at least 2 seconds.
  3. Turn ignition switch OFF and wait at least 10 seconds.
  4. Turn ignition switch ON and wait at least 2 seconds.
  5. Turn ignition switch OFF and wait at least 10 seconds.
About FixVault