FixVault
Home › Nissan-Datsun › 2007 › Sentra SE-R › Repair and Diagnosis › Transmission › Automatic Trans › Continuously Variable Transmission (CVT) › DTC P1723 CVT Speed Sensor Function › DTC Confirmation Procedure › With Consult-III

With Consult-III

  1. Turn ignition switch ON and select "DATA MONITOR" mode for "TRANSMISSION" with CONSULT-III.
  2. Start engine and maintain the following conditions for at least 5 consecutive seconds.

    VEHICLE SPEED SE: 10 km/h (6 MPH) or more 

    ACC PEDAL OPEN: More than 1.0/8 

    RANGE: "D" position 

    ENG SPEED: 450 rpm or more 

    Driving location: Driving the vehicle uphill (increased engine load) will help maintain the driving conditions required for this test. 

  3. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
About FixVault