FixVault
Home › Nissan-Datsun › 2007 › Sentra SE-R › Repair and Diagnosis › Transmission › Automatic Trans › Continuously Variable Transmission (CVT) › DTC U1010 Transmission Control Module (Can) › DTC Confirmation Procedure › With Consult-III

With Consult-III

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode for "TRANSMISSION" with CONSULT-III.
  3. Start engine and wait for at least 6 seconds.
  4. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
About FixVault