FixVault
Home › Nissan-Datsun › 2008 › 350Z 2D Convertible, Standard › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - DTCS P0448 To P1212 › DTC P0451 EVAP Control System Pressure Sensor › DTC Confirmation Procedure › With Consult-III

With Consult-III

  1. Turn ignition switch OFF and wait at least 10 seconds.
  2. Start engine and wait at least 40 seconds.
    NOTE: Do not depress accelerator pedal even slightly.
  3. Check 1st trip DTC.
  4. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
About FixVault