FixVault
Home › Nissan-Datsun › 2008 › Altima Hybrid › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (Hybrid) › Component Diagnosis › P0335 CKP Sensor (Pos) › DTC Logic › DTC Detection Logic

DTC Detection Logic

DTC DETECTING CONDITION AND POSSIBLE CAUSE

DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P0335 Crankshaft position sensor (POS) circuit
  • The crankshaft position sensor (POS) signal is not detected by the ECM during the first few seconds of engine cranking.
  • The proper pulse signal from the crankshaft position sensor (POS) is not sent to ECM while the engine is running.
  • The crankshaft position sensor (POS) signal is not in the normal pattern during engine running.
  • Harness or connectors [Crankshaft position sensor (POS) circuit is open or shorted.]

    (Refrigerant pressure sensor circuit is shorted.)

    (EVAP control system pressure sensor circuit is shorted.)

  • Crankshaft position sensor (POS)
  • Refrigerant pressure sensor
  • EVAP control system pressure sensor
  • Signal plate
About FixVault