DTC Confirmation Procedure
NOTE:
If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next step.
- Turn ignition switch OFF and wait at least 10 seconds.
- Turn ignition switch ON.
- Turn ignition switch OFF and wait at least 10 seconds.
WITH CONSULT-III
- Turn ignition switch ON.
- Select "DATA MONITOR" mode with CONSULT-III.
- Wait at least 5 seconds.
- If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE "
WITH GST
Follow the procedure "WITH CONSULT-III" above.