FixVault
Home › Nissan-Datsun › 2008 › Maxima SL › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - DTCS P1148 To P2A03 › DTC P2101 Electric Throttle Control Function › DTC Confirmation Procedure

DTC Confirmation Procedure

  1. If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next step.
    1. Turn ignition switch OFF and wait at least 10 seconds.
    2. Turn ignition switch ON.
    3. Turn ignition switch OFF and wait at least 10 seconds.
  2. Start engine and let it idle for 5 seconds.
  3. Check DTC.
  4. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ."
About FixVault