Terminals and Reference Values for Automatic Drive Positioner Control Unit
TERMINALS AND REFERENCE VALUES FOR AUTOMATIC DRIVE POSITIONER CONTROL UNIT
| Terminal | Wire Color | Item | Condition | Voltage (V) (Approx.) |
|---|---|---|---|---|
| 2 | L/R | Changeover switch RH signal | Changeover switch in RH position | 0 |
| Other than above | 5 | |||
| 3 | Y/B | Mirror switch UP signal | Mirror switch in UP position | 0 |
| Other than above | 5 | |||
| 4 | G/B | Mirror switch LEFT signal | Mirror switch in LEFT position | 0 |
| Other than above | 5 | |||
| 5 | R/B | Mirror sensor (RH vertical) signal | Mirror motor RH is UP or DOWN operation | Changes between 3.5 (close to peak) 0.5 (close to valley) |
| 6 | L/Y | Mirror sensor (LH vertical) signal | Mirror motor LH is UP or DOWN operation | Changes between 3.5 (close to peak) 0.5 (close to valley) |
| 8 | W/R | Pedal sensor input signal | Pedal position front end | 0.5 |
| Pedal position rear end | 4.5 | |||
| 9 | LG/B | Seat memory switch 1 signal | Memory switch 1 ON | 0 |
| Memory switch 1 OFF | 5 | |||
| 10 | R | UART LINE (TX) | Pedal adjusting switch ON (FORWARD or BACKWARD operation) | |
| 12 | GR/L | Seat memory switch indicator - 1 signal | Memory switch 1 ON | 1 |
| Memory switch 1 OFF | Battery voltage | |||
| 13 | Y | Seat memory switch indicator - 2 signal | Memory switch 2 ON | 1 |
| Memory switch 2 OFF | Battery voltage | |||
| 14 | GR/R | Mirror motor RH UP signal | Mirror motor RH UP operation | 1.7 - Battery voltage |
| Other than above | 0 | |||
| 15 | V/W | Mirror motor RH LEFT signal | Mirror motor RH LEFT operation | 1.7 - Battery voltage |
| Other than above | 0 | |||
| 16 | O | Mirror motor LH DOWN signal | Mirror motor LH DOWN operation | 1.7 - Battery voltage |
| Other than above | 0 | |||
| Mirror motor LH RIGHT signal | Mirror motor LH RIGHT operation | 1.7 - Battery voltage | ||
| Other than above | 0 | |||
| 18 | Y/R | Changeover switch LH signal | Changeover switch in LH position | 0 |
| Other than above | 5 | |||
| 19 | L/B | Mirror switch DOWN signal | Mirror switch in DOWN position | 0 |
| Other than above | 5 | |||
| 20 | V | Mirror switch RIGHT signal | Mirror switch in RIGHT position | 0 |
| Other than above | 5 | |||
| 21 | L/W | Mirror sensor (RH horizontal) signal | Mirror motor RH is LEFT or RIGHT operation | Changes between 3.5 (close to left edge) 0.5 (close to right edge) |
| 22 | G | Mirror sensor (LH horizontal) signal | Mirror motor LH is LEFT or RIGHT operation | Changes between 3.5 (close to right edge) 0.5 (close to left edge) |
| 24 | G/W | Seat set switch signal | Set switch 1 ON | 0 |
| Set switch 1 OFF | 5 | |||
| 25 | P/L | Seat memory switch 2 signal | Memory switch 2 ON | 0 |
| Memory switch 2 OFF | 5 | |||
| 26 | R/W | UART LINE (RX) | Pedal adjusting switch ON (FORWARD or BACKWARD operation) | |
| 30 | SB | Mirror motor RH DOWN signal | Mirror motor RH DOWN operation | 1.7 - Battery voltage |
| Other than above | 0 | |||
| Mirror motor RH RIGHT signal | Mirror motor RH RIGHT operation | 1.7 - Battery voltage | ||
| Other than above | 0 | |||
| 31 | R/Y | Mirror motor LH UP signal | Mirror motor LH UP operation | 1.7 - Battery voltage |
| Other than above | 0 | |||
| 32 | BR | Mirror motor LH LEFT signal | Mirror motor LH LEFT operation | 1.7 - Battery voltage |
| Other than above | 0 | |||
| 33 | W/L | Sensor power supply | - | 5 |
| 34 | BR/Y | Battery power supply | - | Battery voltage |
| 37 | G | Pedal adjusting motor FORWARD signal | Pedal adjusting motor FORWARD operation (Motor operated) | Battery voltage |
| Other than above | 0 | |||
| 39 | W | Battery power supply | - | Battery voltage |
| 40 | B/W | Ground | - | 0 |
| 41 | V | Sensor ground | - | 0 |
| 45 | G/O | Pedal adjusting motor BACKWARD signal | Pedal adjusting motor BACKWARD operation (Motor operated) | Battery voltage |
| Other than above | 0 | |||
| 48 | B | Ground | - | 0 |