FixVault
Home › Nissan-Datsun › 2008 › Quest Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - DTCS P1211 Through P2A03 › DTC P2101 Electric Throttle Control Function › DTC Confirmation Procedure › With Consult-III

With Consult-III

  1. Turn ignition switch ON and wait at least 2 seconds.
  2. Select "DATA MONITOR" mode with CONSULT-III.
  3. Start engine and let it idle for 5 seconds.
  4. Check 1st trip DTC.
  5. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
About FixVault