FixVault
Home › Nissan-Datsun › 2008 › Quest Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - DTCS U1000 Through P0153 › DTC P0102, P0103 MAF Sensor › DTC Confirmation Procedure › Procedure For DTC P0102 › With CONSULT-III

With CONSULT-III

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-III.
  3. Start engine and wait at least 5 seconds.
  4. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
About FixVault