FixVault
Home › Nissan-Datsun › 2008 › Quest SL › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - DTCS P0137 Through P0443 › DTC P0182, P0183 FTT Sensor › DTC Confirmation Procedure › With Consult-III

With Consult-III

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-III.
  3. Wait at least 5 seconds.
  4. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
About FixVault