- Warm the lower tabs with a dryer or equivalent.
NOTE:
Warm the lower tabs sufficiently before installing the mirror body. The tabs may be broken if it is cold. Be especially careful in the colder weather.
- Engage upper tabs of mirror body (1) with power unit (2). Then, press lower part of mirror body (1) down until the lower part snaps to allow engagement of lower tabs.
NOTE:
After installation, visually check that the lower tabs are securely engaged when viewed from the bottom of mirror surface.
- Insert the wire harness terminals into the two terminals.
NOTE:
Make sure to insert the harness terminals into the correct connector. Do not confuse the locations.
Courtesy of NISSAN MOTOR CO., U.S.A.