FixVault
Home › Nissan-Datsun › 2008 › Sentra SE-R › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - Component Testing (Qr25DE) › Ignition Signal › Component Inspection › Condenser-2

Component Inspection: Condenser-2

  1. Turn ignition switch OFF.
  2. Disconnect condenser-2 harness connector.
  3. Check resistance between condenser-2 terminals 1 and 2.

    Resistance: Above 1 MΩ [at 25°C (77°F)] 

    Fig 1: Checking Resistance Between Condenser-2 Terminals 1 And 2
    G04875488Courtesy of NISSAN MOTOR CO., U.S.A.
  4. If NG, replace condenser-2.
About FixVault