FixVault
Home › Nissan-Datsun › 2008 › Sentra SE-R › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - DTCS P1148 To P2A03 (Qr25DE) › DTC P1572 ASCD Brake Switch › DTC Confirmation Procedure › With Consult-III

With Consult-III

  1. Start engine.
  2. Select "DATA MONITOR" mode with CONSULT-III.
  3. Press MAIN switch and make sure that CRUISE indicator lights up.
  4. Drive the vehicle for at least 5 consecutive seconds under the following condition.
    VHCL SPEED SE REFERENCE

    VHCL SPEED SE More than 30 km/h (19 MPH)
    Shift lever Suitable position
  5. Check 1st trip DTC.

    If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".

    If 1st trip DTC is not detected, go to the following step.

  6. Drive the vehicle for at least 5 consecutive seconds under the following condition.
    VHCL SPEED SE REFERENCE

    VHCL SPEED SE More than 30 km/h (19 MPH)
    Shift lever Suitable position
    Driving location Depress the brake pedal for more than 5 seconds so as not to come off from the above-mentioned vehicle speed.
  7. Check 1st trip DTC.
  8. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
About FixVault