FixVault
Home › Nissan-Datsun › 2008 › Sentra SE-R › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - Introduction (Qr25DE) › Basic Service Procedure › Fuel Pressure Check › Fuel Pressure Release › With CONSULT-III

With CONSULT-III

  1. Turn ignition switch ON.
  2. Perform "FUEL PRESSURE RELEASE " in "WORK SUPPORT" mode with CONSULT-III.
  3. Start engine.
  4. After engine stalls, crank it two or three times to release all fuel pressure.
  5. Turn ignition switch OFF.
About FixVault