Removal and Installation: Installation

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

Install the generator and check tension of drive belt. Refer to "TENSION ADJUSTMENT ".
Terminal "1" nut : 10.8 N.m (1.1 kg-m, 8 ft-lb)

CAUTION: Be sure to tighten terminal "1" nut carefully.
For this model, the power generation variable voltage control system that controls the power generation voltage of the generator has been adopted. Therefore, the power generation variable voltage control system inspection should be performed after replacing the generator in order to ensure that the system operates normally. Refer to "POWER GENERATION VARIABLE VOLTAGE CONTROL SYSTEM INSPECTION ".