FixVault
Home › Nissan-Datsun › 2008 › Sentra SE-R › Repair and Diagnosis › External Pages › Different car › Section 12 (Automatic Transmission) › Shift Control System › Control Device Removal and Installation › Removal

Control Device Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the A/T finisher. Refer to "INSTRUMENT PANEL ASSEMBLY ".
  2. Disconnect the following from the A/T control device assembly.
    • A/T selector control cable
    • A/T key interlock cable
    • A/T device connector
  3. Remove the A/T control device assembly.
About FixVault