FixVault

ASCD Steering Switch

  1. Disconnect combination switch (spiral cable) harness connector M203.
  2. Check continuity between combination switch harness connector terminals 14 and 15 with pushing each switch.
    Fig 1: Checking Continuity Between Combination Switch Harness Connector Terminals 14 And 15
    G04875396Courtesy of NISSAN MOTOR CO., U.S.A.
    RESISTANCE REFERENCE

    Switch Condition Resistance [Ω]
    MAIN switch Pressed Approx. 0
    Released Approx. 4, 000
    CANCEL switch Pressed Approx. 250
    Released Approx. 4, 000
    RESUME/ACCELERATE switch Pressed Approx. 1, 480
    Released Approx. 4, 000
    SET/COAST switch Pressed Approx. 660
    Released Approx. 4, 000
  3. If NG, replace ASCD steering switch.