Wheel Alignment
WHEEL ALIGNMENT SPECIFICATIONS
| Item | Standard | ||
|---|---|---|---|
| Camber Degree minute (Decimal degree) | Minimum | -0° 35' (-0.58°) | |
| Nominal | 0° 10' (0.17°) | ||
| Maximum | 0° 55' (0.91°) | ||
| Left and right difference | -0° 45' (-0.75°) | ||
| Caster Degree minute (Decimal degree) | Minimum | 3° 55' (3.92°) | |
| Nominal | 4° 40' (4.67°) | ||
| Maximum | 5° 25' (5.41°) | ||
| Left and right difference | -0° 45' (-0.75°) | ||
| Kingpin inclination Degree minute (Decimal degree) | Minimum | 9° 10' (9.17°) | |
| Nominal | 9° 55' (9.92°) | ||
| Maximum | 13° 25' (13.41°) | ||
| Toe-in | Total toe-in Distance | Minimum | 0 mm (0 in) |
| Nominal | In 1.0 mm (0.05 in) | ||
| Maximum | In 2.0 mm (0.07 in) | ||
| Toe angle (left wheel or right wheel) Degree minute (Decimal degree) | Minimum | 0° 00' (0.00°) | |
| Nominal | In 0° 03' (0.05°) | ||
| Maximum | In 0° 06' (0.10°) | ||
| Measure value under unladen* conditions. *: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions. |
|||