FixVault
Home › Nissan-Datsun › 2009 › Murano SL, AWD › Repair and Diagnosis › Electrical › Body Electrical › Power Control System › Power Distribution System › Component Diagnosis › Push-Button Ignition Switch Position Indicator › Component Inspection

Component Inspection

  1. CHECK PUSH-BUTTON IGNITION SWITCH
    1. Turn ignition switch OFF.
    2. Disconnect push-button ignition switch connector.
    3. Check continuity between push-button ignition switch terminals.
      TERMINALS CONTINUITY REFERENCE

      Terminal Condition Continuity
      Push-button ignition switch
      8 6 Push-button ignition switch position ACC/ON Existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace push-button ignition switch. Refer to "REMOVAL AND INSTALLATION ".

About FixVault