FixVault
Home › Nissan-Datsun › 2009 › Murano SL, AWD › Repair and Diagnosis › Engine Performance › System › Engine Control System - Component Testing › Fuel Pump › Component Inspection (Fuel Pump)

Component Inspection (Fuel Pump)

  1. CHECK FUEL PUMP
    1. Turn ignition switch OFF.
    2. Disconnect "fuel level sensor unit and fuel pump" harness connector.
    3. Check resistance between "fuel level sensor unit and fuel pump" terminals as follows.
      TERMINALS RESISTANCE REFERENCE

      Terminals Resistance
      1 and 3 0.2 - 5.0 Ω [at 25°C (77°F)]

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace "fuel level sensor unit and fuel pump"

About FixVault