Conditions Of Vehicle (Operating Conditions)
- Engine start function is ON when setting on CONSULT-III.
- Mechanical key is not inserted in key cylinder.
- One or more of Intelligent Keys with registered Intelligent Key ID is in the vehicle.
SYMPTOM CHART
| Symptom | Diagnosis/service procedure | Reference |
|---|---|---|
| Ignition switch does not turn on with Intelligent Key. [green "KEY" lamp is displayed] | 1. Check steering lock solenoid. | B2013 ID DISCORD I-KEY-STRG |
| 2. Replace Intelligent Key unit. | INTELLIGENT KEY UNIT | |
| Ignition switch does not turn on with Intelligent Key. ["KEY" lamp does not display] | 1. Check Intelligent Key unit power supply and ground circuit. | POWER SUPPLY AND GROUND CIRCUIT |
| 2. Check ignition knob switch. | IGNITION KNOB SWITCH | |
| 3. Check key switch (BCM input). | KEY SWITCH (BCM INPUT) | |
| 4. Check key switch (Intelligent Key unit input). | KEY SWITCH (INTELLIGENT KEY UNIT INPUT) | |
| 5. Replace Intelligent Key unit. | INTELLIGENT KEY UNIT | |
| 6. Check green "KEY" indicator. | WARNING LAMP | |
| 7. Check red "KEY" indicator. | WARNING LAMP | |
| Ignition switch does not turn on with Intelligent Key. [red "KEY" lamp is displayed] | 1a. Check inside key antenna 1 (instrument panel). | INSIDE KEY ANTENNA 1 (INSTRUMENT PANEL) |
| 1b. Check inside key antenna 2 (luggage compartment). | INSIDE KEY ANTENNA 2 (CENTER CONSOLE) | |
| 1c. Check inside key antenna 3 (center console). | INSIDE KEY ANTENNA 3 (3RD ROW SEAT) | |
| 2. Replace Intelligent Key unit. | INTELLIGENT KEY UNIT | |
| Ignition switch does not turn on with mechanical key | 1. Check key switch (BCM input). | KEY SWITCH (BCM INPUT) |
| 2. Check key switch (Intelligent Key unit input). | KEY SWITCH (INTELLIGENT KEY UNIT INPUT) | |
| Engine cannot be cranked with transmission in "Park" or in "Neutral" position with brake pedal depressed | 1. Check transmission signal. | DTC P0705 PARK/NEUTRAL POSITION SWITCH |
| 2. Check stop lamp switch. | STOP LAMP | |
| "P-SHIFT" indicator does not operate properly | 1. Check "P-SHIFT" indicator. | WARNING LAMP |