Removal and Installation

1. Disconnect the battery negative cable. Refer to "REMOVAL AND INSTALLATION ".
2. Remove the front pillar upper finisher. Refer to "COMPONENT ".
3. Remove the side ventilator grille. Refer to "EXPLODED VIEW ".
4. Remove the instrument side finisher. Refer to "EXPLODED VIEW ".
5. Remove the upper glove box. Refer to "EXPLODED VIEW ".
6. Remove the bolt (A), disconnect the harness connector (1) and remove the remote keyless entry receiver (2).

Fig 1: Identifying Harness Connector And Remote Keyless Entry Receiver

Courtesy of NISSAN MOTOR CO., U.S.A.

Installation is in the reverse order of removal.