FixVault
Home › Nissan-Datsun › 2009 › Quest Base › Repair and Diagnosis › Engine Performance › System › Engine Control System - DTCS P1211 To P2A03 › DTC P2100, P2103 Throttle Control Motor Relay › DTC Confirmation Procedure › Procedure For DTC P2100

Procedure For DTC P2100

  1. Turn ignition switch ON and wait at least 2 seconds.
  2. Start engine and let it idle for 5 seconds.
  3. Check DTC.
  4. If DTC is detected, go to , "DIAGNOSIS PROCEDURE ".
About FixVault