Diagnosis Procedure
- INSPECTION START
Erase (1st trip) DTCs. Refer to , "EMISSION-RELATED DIAGNOSTIC INFORMATION ".
GO TO 2.
- CHECK GROUND TERMINALS
Check ground terminals for corroding or loose connection.
Refer to , "GROUND INSPECTION "
OK or NG
OK: GO TO 3.
NG: Repair or replace.
- SEARCH FOR ELECTRICAL INCIDENT
Perform HOW TO PERFORM EFFICIENT DIAGNOSIS FOR AN ELECTRICAL INCIDENT , INCIDENT SIMULATION TESTS .
OK or NG
OK: GO TO 4.
NG: Repair or replace.
- CHECK CONNECTOR TERMINALS
Refer to HOW TO CHECK TERMINAL , HOW TO PROBE CONNECTORS , HOW TO CHECK ENLARGED CONTACT SPRING OF TERMINAL .
OK or NG
OK: INSPECTION END
NG: Repair or replace connector.