FixVault
Home › Nissan-Datsun › 2009 › Quest Base › Repair and Diagnosis › Transmission › Automatic Transmission › On-Vehicle Service › Revolution Sensor Replacement

Revolution Sensor Replacement

  1. Remove intake air duct.
  2. Disconnect electrical connector.
  3. Remove revolution sensor from A/T.
    4. Fig 1: Locating Revolution Sensor
    G04906220Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Reinstall any part removed.
    • Do not reuse seal bolt. 
About FixVault