FixVault
Home › Nissan-Datsun › 2009 › Rogue S, AWD › Repair and Diagnosis › Engine Performance › System › Engine Control System - Component Testing (CALIFORNIA) › Ignition Signal › Component Inspection (Condenser-1)

Component Inspection (Condenser-1)

  1. CHECK CONDENSER-1
    1. Turn ignition switch OFF.
    2. Disconnect condenser-1 harness connector.
    3. Check resistance between condenser-1 terminals as follows.
      TERMINALS RESISTANCE REFERENCE CHART

      Terminals Resistance
      1 and 2 Above 1 MΩ [at 25°C (77°F)]

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace condenser-1.

About FixVault