Base And Mid System

Refer to Owner's Manual for audio system operating instructions.

Power is supplied at all times

• through 20A fuse (No. 31, located in the fuse and fusible link box)
• to audio unit terminal 19.

  With the ignition switch in the ACC or ON position, power is supplied

• through 10A fuse [No. 6, located in the fuse block (J/B)]
• to audio unit terminal 7.

  Ground is supplied through the case of the audio unit.

  Then audio signals are supplied

• through audio unit terminals 2, 3, 4, 5, 11, 12, 13 and 14
• to terminals + and - of front door speaker LH and RH
• to terminals + and - of front tweeter LH and RH (with mid system) and
• to terminals + and - of rear speaker LH and RH.