Preliminary Check
- CHECK SELF-DIAGNOSIS OPERATION OF COMBINATION METER
Perform self-diagnosis of combination meter. Refer to "SELF-DIAGNOSIS MODE OF COMBINATION METER ".
Does self-diagnosis mode operate?
YES: GO TO 2.
NO: Check power supply and ground circuit of combination meter. Refer to "POWER SUPPLY AND GROUND CIRCUIT INSPECTION ".
- CHECK COMBINATION METER (CONSULT-III)
Select "METER/M&A" on CONSULT-III and perform self-diagnosis of combination meter. Refer to "CONSULT-III FUNCTION (METER/M&A) ".
Self-diagnostic results content
No malfunction detected: Refer to "SYMPTOM CHART ".
Malfunction detected: Refer to "CONSULT-III FUNCTION (METER/M&A) ".