FixVault
Home › Nissan-Datsun › 2009 › Versa Base, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Control System - Introduction › Service Information › Basic Service Procedure › Fuel Pressure Check › Fuel Pressure Release › Without CONSULT-III

Without CONSULT-III

  1. Remove fuel pump fuse (1) located in IPDM E/R (2).
    • <==: Vehicle front
      • Fig 1: Identifying Fuel Pump Fuse And IPDM E/R
      G05932500Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Start engine.
  3. After engine stalls, crank it two or three times to release all fuel pressure.
  4. Turn ignition switch OFF.
  5. Reinstall fuel pump fuse after servicing fuel system.
About FixVault