FixVault
Home › Nissan-Datsun › 2009 › Versa Base, Automatic › Repair and Diagnosis › Transmission › Automatic Transmission › Control Unit (Ram), Control Unit (ROM) › DTC Confirmation Procedure › With Consult-III

With Consult-III

  1. Turn ignition switch ON and select "DATA MONITOR" mode for A/T with CONSULT-III.
  2. Touch "START".
  3. Start engine.
  4. Run engine for at least 2 seconds at idle speed.
  5. If the check result is NG, go to "DIAGNOSTIC PROCEDURE ".
About FixVault