FixVault
Home › Nissan-Datsun › 2009 › Versa Base, Standard › Repair and Diagnosis › Engine Performance › System › Engine Control System - DTCS P0172 To P0463 › DTC P0451 EVAP Control System Pressure Sensor › DTC Confirmation Procedure › With Consult-III

With Consult-III

  1. Turn ignition switch OFF and wait at least 10 seconds.
  2. Turn ignition switch ON and select "DATA MONITOR" mode with CONSULT-III.
  3. Start engine and wait at least 40 seconds.
    NOTE: Do not depress accelerator pedal even slightly.

    If 1st trip DTC is detected, go to "DIAGNOSIS PROCEDURE ".

About FixVault