FixVault
Home › Nissan-Datsun › 2009 › Versa Base, Standard › Repair and Diagnosis › Engine Performance › System › Engine Control System - DTCS P0500 To P2A00 › DTC P1225 TP Sensor › DTC Confirmation Procedure › With Consult-III

With Consult-III

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-III.
  3. Turn ignition switch OFF and wait at least 10 seconds.
  4. Turn ignition switch ON.
  5. If 1st trip DTC is detected, go to "DIAGNOSIS PROCEDURE ".
About FixVault