FixVault
Home › Nissan-Datsun › 2010 › 370Z Base, 2D Convertible, Standard › Repair and Diagnosis › Engine Performance › System › Engine Control System - System Diagnostics And Periodic Maintenance › S-Mode Switch › Component Inspection

Component Inspection

  1. CHECK S-MODE SWITCH
    1. Turn ignition switch OFF.
    2. Disconnect S-MODE switch harness connector.
    3. Check the continuity between S-MODE switch terminals under the following conditions.
    CONTINUITY CHART

    Terminals Condition Continuity
    1 and 2 S-MODE switch Pressed Existed
    Released Not Existed

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Replace S-MODE switch.

About FixVault