System Description
WARNING: This page is about a different variant/trim than selected.
IPDM E/R activates the internal control circuit to perform the relay ON-OFF control according to the input signals from various sensors and the request signals received from control units via CAN communication.
CAUTION:
IPDM E/R integrated relays cannot be removed.
IPDM E/R INTEGRATED RELAYS REFERENCE
| Control relay | Input/output | Transmit unit | Control part | Reference |
|---|---|---|---|---|
|
|
BCM (CAN) |
|
HEADLAMP (LO) CIRCUIT HEADLAMP (HI) CIRCUIT |
| Tail lamp relay | Position light request signal | BCM (CAN) |
|
PARKING LAMP CIRCUIT |
|
Front wiper request signal | BCM (CAN) | Front wiper | FRONT WIPER DOES NOT OPERATE |
| Front wiper auto stop signal | Front wiper motor | |||
| Heater pump relay | Heater pump request signal | ECM (CAN) | Heater pump | HEATER PUMP |
| Ignition relay-1 | Ignition switch ON signal | BCM (CAN) | Ignition relay-1 | FUNCTION DIAGNOSIS |
| Vehicle speed signal | Combination meter (CAN) | |||
| Push-button ignition switch | Push-button ignition switch | |||
| Fuel pump relay | Fuel pump request signal | ECM | Fuel pump | FUEL PUMP |
| ECM relay | ECM relay control signal | ECM | ECM relay | POWER SUPPLY AND GROUND CIRCUIT |
| Throttle control motor relay | Throttle control motor relay signal | ECM | Throttle control motor relay | P2101 ELECTRIC THROTTLE CONTROL FUNCTION |
| Cooling fan relay-1 | Cooling fan request signal | ECM (CAN) | Cooling fan relay-1 | COOLING FAN CONTROL |