FixVault
Home › Nissan-Datsun › 2010 › Sentra SE-R › Repair and Diagnosis › Engine Performance › System › Engine Control System - Introduction (Qr25DE) › Service Information › Basic Service Procedure › Accelerator Pedal Released Position Learning › Operation Procedure

Operation Procedure

  1. Check that accelerator pedal is fully released.
  2. Turn ignition switch ON and wait at least 2 seconds.
  3. Turn ignition switch OFF and wait at least 10 seconds.
  4. Turn ignition switch ON and wait at least 2 seconds.
  5. Turn ignition switch OFF and wait at least 10 seconds.
About FixVault