Disassembly and Assembly: Disassembly

NOTE: Before disassembly, note the proper placement of the wires to the correct terminals and correct wire routing to the terminals.

Disconnect the red, white, and double black wire connectors.
- Press the tabs on the terminals to release the locking tabs.
  
  Fig 1: Pressing Tab
  Courtesy of NISSAN MOTOR CO., U.S.A.
Release the two clips and remove the fuel temperature sensor from the pump assembly.

Fig 2: Releasing Fuel Temperature Sensor Clips
Courtesy of NISSAN MOTOR CO., U.S.A.
Release the tab (A) and slide the level sending unit module and floater arm assembly (B) up to remove.

Fig 3: Sliding Level Sending Unit Module And Floater Arm Assembly
Courtesy of NISSAN MOTOR CO., U.S.A.