Component Function Check

WARNING: This page is about a different variant/trim than selected.

CHECK FUEL PUMP FUNCTION
1. Turn ignition switch ON.
2. Pinch fuel feed hose with two fingers.
  - <=: Vehicle front (Illustration shows the view with intake air duct removed)
    Fuel pressure pulsation should be felt on the fuel feed hose for 1 second after ignition switch is turned ON.
    
    Fig 1: Locating Fuel Feed Hose
    Courtesy of NISSAN MOTOR CO., U.S.A.
    
    Is the inspection result normal?
    
    YES: INSPECTION END
    
    NO: "DIAGNOSIS PROCEDURE ".