FixVault
Home › Nissan-Datsun › 2011 › Cube Base › Repair and Diagnosis › Body & Frame › Windows › Power Window Control System › Removal And Installation › Power Window Main Switch › Removal and Installation › Removal

Removal and Installation: Removal

  1. Remove the power window main switch finisher (2). Refer to "REMOVAL AND INSTALLATION ".
  2. Power window main switch (1) is removed from power window main switch finisher (2) using flat-head screw driver (A) etc.
    Fig 1: Removing Power Window Main Switch
    G07105851Courtesy of NISSAN MOTOR CO., U.S.A.
    CAUTION: Never fold the pawl of power window main switch finisher.
    NOTE: The same procedure is also performed for front power window switch (passenger side) and rear power window switch (LH & RH).
About FixVault