FixVault
Home › Nissan-Datsun › 2011 › Cube Base › Repair and Diagnosis › Engine Performance › System › Engine Control System - DTC P0605 Through DTC P2A00 (Except For CALIFORNIA) › DTC P2101: Electric Throttle Control Function › Component Inspection

Component Inspection

  1. CHECK THROTTLE CONTROL MOTOR
    1. Turn ignition switch OFF.
    2. Disconnect electric throttle control actuator harness connector.
    3. Check the resistance between electric throttle control actuator terminals as per the following.
      RESISTANCE REFERENCE CHART

      Terminals Resistance
      5 and 6 Approx. 1 - 15 Ω [at 25°C (77°F)]

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Go to 2.

  2. REPLACE ELECTRIC THROTTLE CONTROL ACTUATOR
    1. Replace electric throttle control actuator.
    2. Perform "SPECIAL REPAIR REQUIREMENT ".

      INSPECTION END

About FixVault