FixVault
Home › Nissan-Datsun › 2011 › Maxima S › Repair and Diagnosis › Engine Performance › System › Engine Control System - Component And System Testing › Ignition Signal › Component Inspection (Condenser)

Component Inspection (Condenser)

  1. CHECK CONDENSER
    1. Turn ignition switch OFF.
    2. Disconnect condenser harness connector.
    3. Check resistance between condenser terminals as per the following.
      RESISTANCE REFERENCE CHART

      Terminals Resistance
      1 and 2 Above 1 MΩ [at 25C° (77C°)]
      Fig 1: Checking Resistance Between Condenser Terminals
      G04875488Courtesy of NISSAN MOTOR CO., U.S.A.

      Is the inspection result normal? 

      YES >> INSPECTION END

      NO >> Replace condenser.

About FixVault