Data Monitor

WARNING: This page is about a different variant/trim than selected.

ALL SIGNALS

Displays the status of the following vehicle signals inputted into the AV control unit.

For each signal, actual signal can be compared with the condition recognized on the system.

VEHICLE SIGNAL STATUS

Display Item	Display	Vehicle status	Remarks
VHCL SPD SIG	On	Vehicle speed >= 8 km/h (5 MPH)	Changes in indication may be delayed. This is normal.
VHCL SPD SIG	Off	Vehicle speed <8 km/h (5 MPH)
PKB SIG	On	Parking brake is applied.
PKB SIG	Off	Parking brake is released.
ILLUM SIG	On	Lighting switch is ON	-
ILLUM SIG	Off	Lighting switch is OFF
IGN SIG	On	Ignition switch is ON
IGN SIG	Off	Ignition switch is in ACC position
REV SIG	On	Selector lever is in R position	Changes in indication may be delayed. This is Off normal.
REV SIG	Off	Selector lever is in any position other than R	Changes in indication may be delayed. This is Off normal.
SIDE VIEW SW	Off	-	This item is displayed, but cannot be monitored.
ROOM LAMP	Off	-	This item is displayed, but cannot be monitored.

SELECTION FROM MENU

Allows the technician to select which vehicle signals should be displayed and displays the status of the selected vehicle signals.

VEHICLE SIGNALS

Item to be selected	Description
VHCL SPD SIG	The same as when "ALL SIGNALS" is selected.
PKB SIG
ILLUM SIG
IGN SIG
REV SIG
SIDE VIEW SW
ROOM LAMP