ASCD Brake Switch

Check harness continuity between ASCD brake switch terminals 1 and 2 under the following conditions.

CONTINUITY CONDITION REFERENCE CHART

Condition	Continuity
When brake pedal: Fully released.	Should exist.
When brake pedal: Slightly depressed.	Should not exist.

Fig 1: Checking Harness Continuity Between ASCD Brake Switch Terminals 1 And 2

Courtesy of NISSAN MOTOR CO., U.S.A.

If NG, adjust ASCD brake switch installation, refer to "INSPECTION AND ADJUSTMENT - STANDARD PEDAL " or "INSPECTION AND ADJUSTMENT - ADJUSTABLE PEDAL " and perform step 3 again.