Component Inspection (Condenser-1)

CHECK CONDENSER-1

Turn ignition switch OFF.
Disconnect condenser-1 harness connector. For the condenser number, refer to "WIRING DIAGRAM - ENGINE CONTROL SYSTEM - ". For the condenser layout, refer to " ENGINE CONTROL HARNESS ".
Check resistance between condenser-1 terminals as follows.

RESISTANCE REFERENCE CHART

Terminals	Resistance
1 and 2	Above 1 MΩ [at 25°C (77°F)]

Is the inspection result normal?

YES: INSPECTION END

NO: Replace condenser-1.