Steering Switch Check
- CHECK HARNESS
- Turn ignition switch OFF.
- Disconnect audio unit connector M92 and spiral cable connector M30.
- Check continuity between audio unit connector terminal and spiral cable connector terminal.CONTINUITY REFERENCE CHART
Terminals Continuity A B Connector Terminal Connector Terminal M92 6 M30 33 Yes 15 25 16 31 - Check continuity between audio unit and ground.CONTINUITY REFERENCE CHART
Terminals Continuity A (-) Connector Terminal M92 6 Ground No 15 16 OK or NG
OK: GO TO 2.
NG: Repair harness.
- SPIRAL CABLE CHECK
- Disconnect spiral cable connector M78.
- Check continuity between spiral cable terminals.
15 - 33 : Continuity should exist.
17 - 31 : Continuity should exist.
19 - 25 : Continuity should exist.
OK or NG
OK: GO TO 3.
NG: Replace spiral cable. Refer to "REMOVAL AND INSTALLATION ".
- CHECK STEERING SWITCH RESISTANCE
Check resistance between spiral cable connector M78 terminals.
RESISTANCE REFERENCE CHARTTerminal Signal name Condition Resistance (Ω) (Approx.) 17 19 Seek (down) Depress Seek down switch. 165 Phone/End Depress Phone/End switch. 0 Volume (down) Depress volume down switch. 652 15 19 Seek (up) Depress Seek up switch. 165 Phone/Send Depress Phone/Send switch. 0 Volume (up) Depress volume up switch. 652 Courtesy of NISSAN MOTOR CO., U.S.A.
OK or NG
OK: Inspection End.
NG: Replace steering switch. Refer to "REMOVAL AND INSTALLATION ".