"P-SHIFT" Warning Lamp Check

With CONSULT-III 

• Check "INDICATOR" in "ACTIVE TEST" mode with CONSULT-III.
• Select "KNOB ON".

  "P-SHIFT" warning lamp should illuminate.

Without CONSULT-III 

1. Turn ignition switch OFF.
2. While monitoring the combination meter warning lamps, turn ignition switch ON. "P-SHIFT" warning lamp should illuminate for 1 second to perform a bulb check.

   OK or NG 

   OK: Inspection end.

   NG: Check combination meter. Refer to COMBINATION METERS .